Monday, May 11, 2015

Hassle free and Wireless Method of Antenna Installation in your Home

Bad TV reception can drive you crazy, but it is also something that people learn to put up with. Getting a great picture and reception on your television is one of those things that many people put off for a long time because they don’t know how to fix it easily.

Due to the way that digital television works, a bad signal means no signal at all. To overcome all of your reception issues the best thing to do is to upgrade to the latest high quality wide band antennas that offer you a greater range of channels and services that you may not be able to currently receive.

Installing an antenna can be a lot of hassle if you aren’t quite sure that you are doing. Calling in a professional to take care of your antenna installation is often the best choice for many people and can save you a lot of time and money. Installation of digital antennas requires certain knowledge about the local area, the local transmitter and its power and signal capabilities.

From Yagi-Uda to Wide Band UHF

Antennas have come a long way since the very first inceptions and iterations. The most famous type of antenna used even today is the Yagi or yagi-uda antenna. This design has proved to be the perfect way to hone in on a signal, and uses the shape of the antenna itself to provide additional boosting capabilities and feature minimal ghosting and signal loss.

This type of antenna was recently upgraded to provide digital television signals to many homes across the country, and in some areas where a strong digital terrestrial television signal is distributed, even an older analogue Yagi antenna is capable of holding a decent signal.

A more Capable, Precise Antenna



In the modern age, multiple broadcast towers and signals have meant that a more precise antenna, capable of wide band came onto the market. These kind of antennas are perfect for those who wish to receive digital channels in areas where some services are split between broadcast antennas, and where multiplex doubling is an issue.

Installing an Antenna with Wireless Capabilities



Installing an antenna requires you first to know where the broadcast signal is coming from to get the best picture. Many professionals use a signal detector to locate the precise direction of the antenna and then manually move the antenna into place for fine tuning.

You can take a look at all of the antennas down your street to see which way they are facing to give you a rough estimate, but the use of a signal detector will boost your chances of securing a solid signal.

Roof Installation



Fixing of the antenna to the roof or highest point is advised, with a line of sight not totally necessary, as antennas do not work in the same way as a satellite dish does. If you have a clear sight of the region in which your broadcast signal is coming from, you are less likely to suffer from interference, signal doubling or bouncing which causes multiple instances of the same channel at different frequencies on your receiver.

Securely install your antenna and use high quality copper coaxial which has been shielded to ensure that a minimum of signal loss is provided along the length of the cable. Run your cables around your home at a level pace, ensuring that the cable isn’t secured along the floor or directly under water pipes of other areas that could damage the cable itself.

Power Tools at the Ready!



 A drill is needed to make a hole through a wall or window frame to allow the cable to come into the room you wish to feed with television signals. Use cable tacks to secure the cable in place and run the cable neatly along any walls towards your device.

You can feed the cable through the wall and install a distribution box on the wall to create a neater cable feed system. In this case you will need another coaxial cable which then runs from the distribution box to your television or receiver.

Final Connection



Fit the coaxial connector to the end of the cable once you have cut the length to your preferred size and you are ready to start tuning your receiver or television to install your channels.

A wireless adaptor is available that will allow you to watch television in different rooms. You can purchase these types of devices from reputable electronics stores that will plug into your main antenna and then a second device will plug into your television.

This will wirelessly send the signal to a second television which doesn’t have an antenna connection. Alternatively, you can hook up your digital receiver to the second television and enjoy digital TV, Satellite TV and more on a second device.

Complications Associated with DIY Installations



There are many different complications that will arise when installing your antenna, so it is advised that you call a professional who can help with all aspects of your antenna installation. Antenna Gold Coast are a great example of a company that will help plan an installation with you and allow you to see each step as it is being done, with a range of options, from multiple room installations and other added extras.

Hire an Antenna Gold Coast Professional

A professional will be able to secure you the best signal, install a central distribution box that can feed multiple televisions in a home, as well as install a wireless antenna system to allow you to watch television on multiple devices whenever you need.

Don’t skimp on your antenna installation by doing it yourself, treat your family to perfect reception and a solid signal that will last many years to come!